Help with Win 10 errors / crashing - DINPUT8.dll ??

Ask questions, discuss ideas, get answers
Post Reply
pepsi_max2k
Posts: 4
Joined: Thu May 22, 2014 7:20 pm

Help with Win 10 errors / crashing - DINPUT8.dll ??

Post by pepsi_max2k »

Hey guys - possibly the wrong place for this, but anyway, it's stumping me and anyone else looking at it so...

For full background, see http://team-simple.org/forum/viewtopic.php?pid=81135 .

But basically, had 1942 on Win 7 (patches / etc fine), then upgrade to Win 10, fine. Then, whilst doing something totally unrelated, installed (amongst other things) some old Xbox 360 pad drivers which forced an old DirectX to install, and ever since I've been getting a whole heap of issues with 1942.

- In short, first it crashed on load (DINPUT8.dll error in event viewer) though would load with compatibility mode, but still stuck on any map load at around 25%.
- I tried a restore point (prior to one saying "Installed DirectX" and it was fine. For 10 minutes, then the same issue came back, possibly (or not) related to having a network connection.
- I've now tried a Win 10 full reset (which may or may not have actually removed all drivers) and, after installing all patches / modded exes, vanilla is pretty much fine (albeit the odd crash switching maps, which is pretty normal, but still gives the same DINPUT8.dll error), however...
- Loading any mods gives exactly the same issue as I started with - either DINPUT8.dll crash on load, or (if launching maps via vanilla) will just get stuck at 25% again.

So, anyway... do you guys have *any* idea what the hell is going on (inb4 "win 10" :roll: ), and... is there some kinda debug tool I can use to see what the hell is stoping mod maps loading at 25%? I'm assuming this is when it tries to load controller drivers, causing a silent issue with Dinput again, but I dunno for sure. FWIW, maps stop at the same point as they would if 1942 is blocked by a firewall (tested on vanilla after reset, and fixed when whitelisted).

EDIT: ok... possibly solved by simply turning off compatibility mode (forgot I had it on when i shouldn't...). but I've been here before and ther error's returned. anyway, on the off chance it works, I'm just gonna drop a win 10 install routine for anyone else needing it....

prelogue:
- NEVER EVER install Xbox 360 pad drivers!
- 1942 won't execute at all until the last few steps (nocd patch - needed due to SECDRV.sys error - see http://battlegroup42.de/News-BattleGrou ... em-72.html ). And yes, the FH stuff is probably a requirement (it, eventually, includes some specific win patches that, well, ymmv if you don't use them).

1. CD install as normal; you'll need to run setup from disc (it doesn't autorun afaik). Origin ymmv.
2. Install 1.6.19 patch (google a link - standard official download).
3. Install 1.6 to 1.61b patch (google a link - standard official download).
4. Forgotten_Hope_0.7_origin_win7 - from http://forgottenhope.warumdarum.de/downloads.php , needed for the following:
5. FH_Fan_Mappack_6 - from http://www.moddb.com/mods/forgotten-hop ... /downloads , also needed for the following
6. FHSW_v0.552_Setup_Part_1 from http://www.moddb.com/mods/forgotten-hop ... /downloads , also needed for the following
7. FHSW_v0.552_Setup_Part_2 from http://www.moddb.com/mods/forgotten-hop ... /downloads . and say YES to any win 7 patches / fixes / modded exes / whatever. In short, steps 4 to 7 are purely to install these patches. sure, you might getaway without them, but don't blame me if it doesn't work :)
8. battlefield_1942_gamespy_patch_v1.61 from http://team-simple.org/download/ , needed to get gamespy working again. and I believe this includes widescreen and nocd patch.

Note you'll need to install "Direct Play" or something like that on first run (win 10 will auto prompt you). And you'll need to set the BF1942.exe in rootto run as admin, but *not* compatibility mode. And first internet run you'll need to whitelist in firewall (another auto prompt).

And I think that's all. If it still doesn't run, also try one of to following from team simple (last link above):
Battlefield 1942 v1.61 Retail executable patched
Battlefield 1942 v1.612 Retail executable patched
Battlefield 1942 v1.61 Origin executable patched
Battlefield 1942 v1.612 Origin executable patched
Diamondback
Posts: 589
Joined: Mon Oct 01, 2012 3:13 pm
Location: Canada
Contact:

Re: Help with Win 10 errors / crashing - DINPUT8.dll ??

Post by Diamondback »

Ugh Windows 10, still don't understand how people install that spyware on their computer. I've been using Win 8.1 since two years now and it works fine with modding and playing games, with absolutely 0 errors. Just downgrade to Win 8.1 and voila, problem solved.
See my Strasbourg map project here.
User avatar
Swaffy
Posts: 1715
Joined: Sun Aug 29, 2010 9:25 pm
Location: Cibolo, Texas

Re: Help with Win 10 errors / crashing - DINPUT8.dll ??

Post by Swaffy »

Classical Modder wrote:Ugh Windows 10, still don't understand how people install that spyware on their computer. I've been using Win 8.1 since two years now and it works fine with modding and playing games, with absolutely 0 errors. Just downgrade to Win 8.1 and voila, problem solved.
Win 10, aka Error Simulator

My friend and I were on Skype today and he was telling me how he's been getting blue screen for false reasons.
(Forum Thread|Download) Swaffy'sMod v0.34 | Download link to come Soon™
pepsi_max2k
Posts: 4
Joined: Thu May 22, 2014 7:20 pm

Re: Help with Win 10 errors / crashing - DINPUT8.dll ??

Post by pepsi_max2k »

Swaffy wrote:My friend and I were on Skype today and he was telling me how he's been getting blue screen for false reasons.
orly?

Image

honestly, 10 is fine if you install and setup right. see op.
Post Reply