Installation
Installation requires
WinRaR
Should work on any computer running Windows with .NET Framework 2.0 installed - Windows 98 or later.
1. Download the program
here
2. Extract the content of the .rar anywhere you want to have the updater installed.
To start the program, launch Custom-maps Updater.exe inside the extracted Custom-maps Updater folder.
Simple how to use guide
When you first start the program, it should look something like this (depending on your operating system).
Start by clicking the "Select Battlefield 1942 Folder" button.
In the window that appears, simply locate your Battlefield 1942 folder
(in my case, C:\Program Files\EA GAMES\Battlefield 1942\), select it, and click OK.
The location you choose will be saved and you won't need to enter it again when you want to update in the future.
Now that the program knows where your Battlefield 1942 folder is, press the "Check for Updates" button
and the program will try to recognize which custom-maps files you have and which you're missing.
Now the marked text in the image below will tell you if there are files to update or not.
If the "Update" button is clickable it means that you can update. Click it and you will see that the bar starts progressing,
when it's done you should receive a message saying that the update was completed.
Notes
You can also check the "Show Map List" (look at the picture downstairs) if you want to see a full list of all the custom maps and which
you have installed and fully updated.
If there are updates to the program, it will tell you so when you start it,
but you will have to update it manually and all updates will be posted in this thread.
Source:
silentheroes.se
deutsch:
Installation
Die Installation erfordert
WinRaR
Auf jedem Computer unter Windows 98 oder höher sollte .NET Framework 2.0 installiert sein.
1. Laden Sie das Programm
here
2. Extrahieren Sie den Inhalt der .rar Datei überall wo Sie den updater installiert haben wollen.
Um das Programm zu starten, starten Sie die
Custom-Karten Updater.exe und extrahieren mit dem
Custom-Maps updater in den Ordner.
Anwendung
Wenn Sie das Programm starten, sollte es zuerst wie folgt (je nach Betriebssystem) aussehen.
Starten Sie, indem Sie auf die Schaltfläche "Ordner Battlefield 1942" auswählen.
Suchen Sie im Fenster, das angezeigt wird einfach Ihr Battlefield 1942-Ordner
(in meinem Fall, C:\Program Files\EA GAMES\Battlefield 1942\) wählen Sie den Pfad aus, und klicken Sie auf OK.
Es wird dann in den Bereich installiert den sie ausgewählt haben. Sie müssen den Pfad nicht erneut eingeben, wenn Sie in Zukunft die Maps "aktualisieren" möchten.
Nun, da das Programm weiß, wo Ihr Battlefield 1942-Ordner ist, drücken Sie die Schaltfläche "Check for Updates"
und das Programm wird versuchen, die benutzerdefinierte-Karten Dateien zu erkennen die Sie haben und die, die noch fehlen.
Jetzt zeigt ihnen das Programm, dass eine neue aktuelle Map zum Download bereit steht, die ihnen noch fehlt.
Dann drücken sie auf update, wie unten im Bild beschrieben.
Wenn die Schaltfläche "Aktualisieren" anklickbar ist, bedeutet dies, dass Sie aktualisieren können. Klicken Sie darauf und Sie werden sehen, dass die Bar zu aktualisieren beginnt.
Wenn das update fertig ist, erhalten Sie eine Meldung, dass die Aktualisierung abgeschlossen wurde.
Notizen
Sie können auch die "Map Index Anzeige Liste" überprüfen (siehe im unteren Bild), wenn Sie eine vollständige Liste aller vorhandenen Karten ansehen möchten,
die installiert und vollständig aktualisiert wurden.
Wenn es Updates für das Programm gibt, wird es Ihnen beim Programm Start mitgeteilt.
Sie aktualisieren es dann Manuell von Hand.
Quelle: silentheroes.se